Vintage Mazda Restored Parts

Restoration parts page -

> Salvage Mazda Factory Original/Restored*

> Mazda Factory new & NOS

* salvaged parts in excellent to restored condition

Restoration/reconditioning services available

 

 

This page:

Distributors     Air Control Valves     Pre RX-7 emission < 79   Post RX-7 emission >80

- NEW -Reconditioned Distributors

- NEW - Reconditioned Emission Valves

NEW OLD STOCK for restoration also here

(As always - most resent   VMRP   items shown at top of page)


The other parts pages:

Cosmo RePu  RX3 808     SA/FB    FC3S   FD3S    Miata MX5

The Web Pages:

   Parts Catalog Home     Complete motors/parts   Cars for sale 

  Old School Performance - Odd & Ends  Wheels and tires  Miscellania - Books Posters and stuff   

Home

 

Distributors

All distributors have been completely disassembled including breaker plate and mechanical advance assembly

All parts and components are chemically, ultrasonically and/or mechanically cleaned and inspected

renewed as required

New inner shaft seal and out o-ring renewed

 

Bare distributors do not come with points, condensors, vacuum controls, ignitors, caps/rotors, unless noted

Some of what is involved in reconditioning/restoring a Mazda rotary engine distributor

Breaker plate/electronic pickup assembly

      

Main shaft assembly with mechanical advance mechanism

   

different means used for cleaning include; chemical, ultrasonic and/or mechanical

 

Distributors   Reconditioned - All

Returned ready to install

Send in your distributor-

Upgrade options:

Modifications for race - lead/trail set for simultaneous triggering- no centrifugal advance

Modifications for single trigger dual coil operation

email/text

Distributor Reconditioning Service:

Send your distributor. It will then be:

  • Completely disassembled
  • Thoroughly Cleaned and inspected
  • Lubricated as needed
  • Assembled and tested

You will be apprised of the progress of the restoration including images and apprised of any issues that warrant attention. Recommendations and estimates will be presented before any extended or additional work is performed.

  • Weights lubricated or locked
  • Pickup plate lubricated or locked
  • Vacuum controls tested, replaced or locked
  • Mitsubishi ignitors tested, replaced
  • New factory Mazda seal installed
  • New factory Mazda o-ring installed
  • Factory Mazda/Mitsubishi cap and rotor - recommended not included

$195 labor - includes new internal shaft seal and outer o-ring - return shipping internal USA

One week turnaround standard

Expedited Service Available

 

   Build options

    RD1 RD2 RD3 RD4 RD5 RD6 RD7
Bare - shaft only  
Breaker plate    
Pickups/points/cond      
Vacuum Controls        
Ignitors *          
Cap and Rotor *            
NGK Wire set              
* mitsubishi                

 

Applications - Part numbers
 
RX2
RX3
RX4
Cosmo
REPU

RX712A

RX 13B
1757-18-200A
74
1758-18-200A
74/77
3625-18-200A
75/77
3648-18-200
76
3841-18-200
80
8555-18-200A*
79
8761-18-200
78
N201-18-200
81/82
N231-18-200**
83
N249-18-200
84/85
N304-18-200
84/85
*not US    **SS to N249      as of 2009 parts book

 

Reconditioned

Distributor 1974/77 13B 

1758-18-200A

 

 

1758  Distributor - comes with new points cap and rotor and used vacuum control, wire set and condensers.

Restoration or Concours

325

3841-18-200

Reconditioned

1980 Electronic Distributor complete system

8341  Distributor - comes with new cap and rotor, tested vacuum controls, Mitsubishi ignitors, wire set and condensers

Mazda Factory new Mitsubishi ignitors are still available $375 each which we can still get

Restoration or Concours

925

Reconditioned

Distributor 1981/1982  N201

shown with pickups

return a core with pickups-receive $15 back

Reconditioned

Distributor 1983  N231 shown with pickups

return a core with pickups receive $15 back

Reconditioned

Distributor 1984/85 13B  N304 shown with pickups

return a core with pickups-receive $15 back

Reconditioned

Distributor 1984/85 13B  N304 shown w/vac controls and ignitors

Light weight springs on mechanical advance, faster advance response

return a core with ignitors and vacuum controls-receive $35 back

Emission Valves and components

Pre 1979 ACV'S being prepared RX3 RX2 RX4 Cosmo RePU- check back soon

--

Decel  -  AAV

--

1757-13-750

1974 - 1978 Decel Anti Afterburn Valve

3 total 

pictured item sold NLA

Disassembled - clecked cleaned  diaphragms excellent conditon  - solinoids checked cleaned

Price determined by cosmetics, internals are in like condition, excellent, new solinoid o-rings

 

       

295

 

1757-13-750

Decel AAV  not #10 cosmetically

Disassembled - clecked cleaned  diaphragms excellent conditon  - solinoids checked cleaned

there are 3 in similar condition

250
  E.G.R.  

8344-13-950 VALVE,E.G.R. CALIF.

Rare working EGR salvage

valve for 79/80 California IM standard

SOUPAPE E.G.R.

 

 

 

285
 

Air Control Valves

the heart of the rotary emission system

 

1981 Air control valve

SN201-13-720

      $435

1981-1982 Air control valve

SN203-13-720

      $325
     
     

 

Reconditioned Parts -

ready for final paint/prep or install

--

Wiper transmission/link assembly

8871-76-601B link, NLA from Mazda

8871-76-602B frame

disassembled-cleaned-lubed-assembled

95
SOLD

exhaust extractor and covers

bead blasted and cleaned one mount hole rethreaded - mounting bolts included - mounting screws shown loose will be tight before shipment

Not 100% perfect

 

 

  SOLD

8562-55-481 used

78/79 meter, fuel thermo

(for analogue clock)

SA22C.. to 504718

calibrated and tested

No Longer Available new from Mazda

135

FA54-55-491 new old stock

84/85 meter, oil volts

All

calibrated and tested

No Longer Available new from Mazda

165

FA54-55-491 used

84/85 meter, oil volts

All

calibrated and tested

No Longer Available new from Mazda

125
b3      

0247-56-275

salvage

Original cloth vinyl shift boot for 1978/1979 very pliable (which can be seen in 4th photo)

Vintage/Concours

  125

1981/83 Battery tray

Powder Coated flat black

S8871-54-260B

    

$75

1978/79 Battery tray

to VIN 531148

bead blasted and primer coated

S8871-54-260 

 

$65
$65
       

SA 78/79 early

brake anchor pin set of two - for one side

no rust

 

$60

$60

SA 78/79 early

brake backing plate left

$105
$105

SA 78/79 early

brake backing plate Right

  $105
$105
       
  • Includes:
  • Bracket 8871-18-810A
  • Bracket 8871-18-106C
  • Pipe 8245-18-107
  • Bolt 907860850

- SA/FB Mazda RX7 S1/S3 78/85 -- US/Spec  

$65

"Rat nest"

Solenoid rails 79/80

  • SA-1*,2 3 solenoids;vent valve;evap check valve;vac tubing;wire loom
  • SA-3 2 solenoids;vent valve;evap check valve; some vac tubing
  • SA-4 3 solenoids;vent valve;evap check valve;some vac tubing
  • SA-5 Tubing only;vent valve 78/79

*evap check valve will be included

Sorry no enlargement

  • SA-1 $350

 

  • SA-2 $350

 

  • SA-3 $100

 

  • SA-4 $150

 

  • SA-5 $125
  • SA-1 $350
  • SA-2 $350
  • SA-3 $100
  • SA-4 $150
  • SA-5 $125

 

Oil Metering system

reconditioning of your, old school, metering pumps available* - inquire

*condition permitting

 

 

         N246-14-600

Condition: RECONDITIONED/RESEALED

We have been reconditioning these for years

No more leaks from metering pump, replacing metering lines at the time recommended, as needed

Inquire about other years 71/85 only 

Sorry no electronic pumps available

Oil metering pump 84/85 GSL-SE 13B

gslseMpump2.jpg (76092 bytes)

   All new o rings  

gasket or o-ring included

- hardware available -

Last know retail - $246.87   1990

 

No Longer Available New 

 
Oil Metering control rods most years - inquire   $25 email

 Resealed Oil Metering pumps

original application - 78/85 12A

can be used on all 74/78

 

Disassembled, ultra sonically cleaned, new seals and o-rings installed preluded

125
$125
       

Exhaust shrouds and bits from 1971 to 1985

Most have been bead cleaned, coated, come with original hardware, ready to install, unless noted or shown in image

   

Exhaust shroud complete

84/85 GSLSE 13B

No rust

Manifold available

 

N304-13-380A   N304-13-330B

exhaust manifold available

150
$150

Exhaust shroud complete

No Rust   see above

83/85 12A

exhaust manifold available-  
$160
       

Exhaust shrouds complete

2

No Rust

81/82

see above 160 each
$160

ss

     

  Exhaust shroud lower

2

No Rust

81/82

 

1480-13-380A

65 each
$65

Exhaust shroud upper

79/80

     

Misc. exhaust parts

from 71-85

thermal reactor to catalyst no rust parts - rare thermal reactor air pipes

ACV pipes

T/R diffusers

   

79/80 shifter arm with retainer, one bushing and spring $45
$45

79/85 Hood latch

No rust

Silver sold

$25 each
$25

SA-FB hood hinge sets

3 available - good condition - a couple show battery acid damage, nothing major

surface rust on one

$40
$40

1978/80 Rear panel carpet - black

  35.95 SOLD
79/85 rear springs -only one pair in this condition

No Rust

$85
$85

Carburetor insulator 78/82

8871-13-220A

Standard

 

Images Facsimile only

   

2 available - one has 15 x 15mm chip (being repaired with epoxy) 

$95

$95

Wire harness's

1979/80

engine compartment to interior, rear

no engine 

see rat nest solenoid rails

$475
$475

heater blower motor - 81-85

2 Available

  $65
$65

The other parts pages:

Cosmo RePu  RX3 808     SA/FB    FC3S   FD3S    Miata MX5

The Web Pages:

   Parts Catalog Home     Complete motors/parts   Cars for sale 

  Old School Performance - Odd & Ends  Wheels and tires  Miscellania - Books Posters and stuff   

Home

 

Mazda New in Boxes - New Old Stock

Engine compartment

Many no Longer Available from Mazda 

 Description Quantity available

Images- don't forget to click on images to see larger version

Price

 Add to cart 

1881-18-880A #1 sensor r 188118880A.jpg (34505 bytes) 112.75
1881-18-880A
8712-18-510 water sensor 871218510.jpg (22760 bytes) NLA new from Mazda 

19.95

8712-18-510
FA42-61-213A Hose heater FA4261213A.jpg (41214 bytes) 18.95
FA42-61-213A
1757-24-314 point set 175724314.jpg (81052 bytes) 12.40 each
8871-51-935 light bracket 887151935.jpg (59309 bytes) 38.76
       
3648-24-303

ignition rotor 76/80

364824303.jpg (47614 bytes) 11.54 plus shipping  
1757-24-310

distributor cap 74/80

175724310.jpg (63389 bytes)

34.97 plus shipping

 
Spark arrestor cover - protects distributor components from high voltage aurora borealis effect  sparking between rotor and cap contacts on the electronic ignition RX-7's 81/85 - if you are having ignition issues this as well as using Mazda/Mitsubishi and NGK will help a lot. 

8245-24-368A

_EBY0876.jpg (49170 bytes)

17.95

       
 
1480-24-350A Vacuum Control 84/85 carburetor 

away from condenser

148024350A.jpg (68472 bytes) SOLD
1757-24-350 1757243500.jpg (62069 bytes) 37.97
N201-24-351 vacuum control

NO LONGER AVAILABLE FROM MAZDA  LAST ONE

NO LONGER AVAILABLE FROM MAZDA  LAST ONE

CONCOURS OR RESTORATION

65.95
N231-24-351 vacuum control 84/85 carb 

next to condenser

NO LONGER AVAILABLE FROM MAZDA  LAST ONE

NO LONGER AVAILABLE FROM MAZDA  LAST ONE

CONCOURS OR RESTORATION

N23124351.jpg (60441 bytes)

SOLD
       
Fuse links - Lights, Ignition, Main, Starter fuse.JPG (334686 bytes)    
JE27-20-180 Pulsation damper GSL-SE   JE2720180.jpg (78452 bytes)JE2720180-2.jpg (71922 bytes) 160.23
J      
3625-13-7300 check valve 

NO LONGER AVAILABLE $24.65

3625137300.jpg (84462 bytes) 24.65

Oil pump upgrade parts 

for 8501pump 24mm to 30mm  

convert old oil pump to high flow and volume for competition  1757-14-1120 shaft  0820-23-882A rotor sets 8553-14-118

This is only for pre-1986

parts NLA from Mazda 

15mm rotor sets

 last produced - mid 1990's

0820_opupgrade.jpg (93127 bytes)

  • 15mm rotor sets - 50 each

  • intermediate housing - 55

  • shaft - 45

$175 All four pieces 

 

$175

Factory Mazda New in box

76/82 12A stock

8501-14-100

NLA from Mazda

 

opnib

Hasn't been available from Mazda since 1999.

 $185

 

 

 $185

Miscellaneous NIB NOS parts

sorry many have been sold 

safbmiscnib.jpg (327979 bytes)   INQUIRE
       
  R    

Purchase Parts online, using secure PayPal shopping cart              



If you see any item you are interested in please email: sales@rotaryresponse.com with any parts requests, include mazda part number.

Please use your reload button often to see current pages

 Here is the list of available parts as of:  12 November 2010 11:25   Newly listed parts should be shown first

Remember to click on any image to see larger picture

Interior -

Factory Mazda New in Boxes or bags

8871-62-761D Rear Hatch Rubber

New

Last One

 

887162761D.jpg (77283 bytes)

145.65

 

8544-72-502 Window grommet

79/85 RX7   

854472502.jpg (114298 bytes) 8.50 each

15 for two

8.50 - one
15.00 - two
       
       
8116-58-303  12

Door pull cup  red

811630312.jpg (69013 bytes) nla

 

Pair 303-12 Save shipping  nla
8116-58-303 65

Door pull cup black

811630365.jpg (72023 bytes) 17.77

Pair 303-65 Save shipping  28.95

       
0247-56-275 

shift boot

SA/FB/FC

click image to see larger

44.75
       
1243-69-373 04

plug black 

Door pull plug 78/80 RX7  14.65

NLA new from MAZDA

       

8871-51-881C NLA new from MAZDA

$39.95

NLA new from MAZDA

 
       
FA01-52 49.75
 
       
FA04-69-320-28

RX7 D/S Visor 84/85 brown

 NLA new from MAZDA
$89.65

NLA new from MAZDA

0247-56-275 vinyl shifter boot 

NLA new from MAZDA

SA only 

$204.60 NLA new from MAZDA
       

NIB

  • RX7  82-83

  • GLC  81-85

 BA24-66-155A

 

 RX7- GLC Ignition Switch  

dsc01935_edited.jpg (61069 bytes)

 $134.95

 

 

Exterior - body parts - trim - lights - lens

New and used

8871-51-721

78-81 RX7

front fender emblem

   
F023-51-770A

81-85 RX7

front mazda badge

mazda

 

Factory new Mazda

 
New "Rotary ENGINE" badge   all eby_0121.jpg (58922 bytes) $125
  Salvaged  --  good to use  
8871-69-170A

left side Mirror Manual 

plastic excellent condition

 Images yet to be posted  

$95
       

Rear quarter glass 1978/1985

8871-62-950 right  0

8871-63-950  left   3

MVC-050F.JPG (22454 bytes)  8871-62-950 Sorry 

Sold Out

8871-63-950   $50.00  
       
81/85 sorry  left onlydsc01394.jpg (112394 bytes) $35
81/85

only one right

dsc01394.jpg (112394 bytes)

   
Left side sold dsc01395.jpg (97325 bytes) 45.95 each
Side marker lens top 5 are 79/80  dsc01396.jpg (115326 bytes) 78/80 $19.95 each

can still get some of these new   

bottom 6 - 81/85 NO REDS LEFT

dsc01406.jpg (66475 bytes)

81/85 $19.95 each 
       
New --  Fuel - Emissions - Exhaust -- Used

 

There have been a lot of requests recently for carburetors due to the fact that the current carburetor has been rebuilt a couple of times and it does not work.

 

It has been found that the most common cause has been that aftermarket base gaskets had been installed which blocked the porting from the manifold to carburetor.

 

The carbureted RX7 utilizes an insulator between it and the manifold, the insulator is the base gasket. Do not try to scrap it clean for another gasket, there is no separate gasket, they do not exist other than when the insulator was manufactured.

 

Most all aftermarket kits are based on the pre-1979 vehicles, which did have replaceable paper gaskets.. Carburetors were not ported for vacuum through the manifold. The emission systems on the earlier vehicles were less complex. All aftermarket kits do supply the four hole square gaskets that are used on the pre 79 rotaries.

 

So, if you are here looking for a carburetor to replace one that has been gone through many times and still does not work, check for and remove any aftermarket base gaskets that were installed.

 

The Nikki is a bulletproof carburetor that can be reconditioned many times. As long as it does not get damaged from corrosion from sitting with water in it or some one damages it. They are not really that complex, just have a lot of parts.

 

Common diy issues; mixing the main fuel jets and incorrect float level. Have seen more than once – needle valves installed upside down.

 

Floats, Al/Cu seals, needle valves and seats, air mix screw/spring/cap, some gaskets only air horn, body to base, etc

Miscellaneous Carburetor parts misccarb.jpg (114695 bytes) All  Inquire  
       
Salvage - fuel

Fuel sender

8871-61-960/A

excellent condition, cleaned and tested good

mounting screws

gasket

NO RUST

$175
$175
IM 240 - Emissions - New - exhaust
N203-13-720

Air Control Valve 

1983 Standard Federal

$495

 

N201-40-400 pre MONO-catalyst

81/82 12A

$365
N305-40-780 pre-cat

84/85 12A

factory new

n30540780cat.JPG (218535 bytes)

n30540780.JPG (218083 bytes)

$385.85

 

Savaged good to use-
Fresh air pipe, manifold to heater box. no rust 79airpipeexhaust.jpg (77808 bytes) $95 each  
       

 

Suspension - Brakes - Steering - Clutch

Hydraulic Brake clutch repair kits, bearing kits 

 Description

Quantity

available

Images- don't forget to click on images to see larger version

Price

 buy now

 Add to cart 

1757-32-220 Pitman arm

only one left

Many application Mazda

   Cleaned lubed new boots

$65 last one
Pitman arm
       
8871-32-311C Lower steering link Left

$45 each
Lwr link

8531-99-322 in

8021-32-324 out

tie rods inner-outer

many application mazda

No play, cleaned lubed new Factory Mazda boots

 

$95
T/R pair
Rebuilt Clutch master and slave 83-85

Factory mazda kits and parts used - not aftermarket

http://www.rotaryresponse.com/eby_0088.jpg (134760 bytes)http://www.rotaryresponse.com/eby_0089.jpg (79181 bytes) $110 for both
1983 GSL rear disc brake housing complete 3rd member-rebuilt 

  Ready to install. Bolt in and go. This rear was built for serious driving/racing. $1250.00.

gslrear.jpg (174114 bytes)

  •  Tighter LSD
  • New bearings,
  • New brakes
  • New brake line
  • Filled with SWEPCO

$1250.00

Freight shipping $450

or local pick up, no shipping

 

Only one set left!

FA66-34-011 right

FA67-34-011 left

Front spring GSL-SE right and left

(will fit all 79-85)

132.40 each Right  
Left
Clutch master repair kits NIB

 

Clutch master repair kits NIB

Brake Master repair kits NIB

   
8173-89-431

81/85 12A

No Longer Available from Mazda

   
GA02-49-530

81/85 seals only

No Longer Available from Mazda

19.99
GA02-49-520A  84/86  w spring 21.78
W055-41-53Z    84/90 n spring 25.86
       
FB01-49-460 Slave kit all  
       
0088-41-352A spring Clutch pedal return spring 79/85 RX7.   Various MAZDA models 71-90  6.25
       
FA18-43-810 Flexible pipe Flex hose, clutch 44.10
FA66-43-980A Flex hose GSL-SE  Front brake hose, body to caliper 62.05
FA07-43-820 Flex hose 81/85 RX7 Rear flexible brake hose, body to differential  24.50
Front bearing retainer/TOB collar

AL and steel SA/FB/FC 

3 of each

Factory Mazda new seal and gasket available 4.25 each

 

dsc01342_edited.jpg (83573 bytes)

 
Al $35 each

Steel $50 

Aluminium $35.00
Steel $50.00
 

Clutch slave kit all

   
Miscellaneous trim, clips, brackets: New and used

Items will be posted keep watching.

new misc 1.jpg (606352 bytes) new misc 2.jpg (562731 bytes) See anything? email: sales@rotaryresponse.com Most items already sold - All fast movers are gone  

**  Factory Mazda RX7 Clutch and Disc **

1981 to 1982 only

1769-16-410A & 0839-16-460F

 New - Open Box

 dsc01938_edited.jpg (97724 bytes)

 dsc01939_edited.jpg (123618 bytes)

 
$255.00
       
8940-26-251A Brake Drum

can be used on

RX2 RX3 RX7 

4X110 

only one available

MSRP 150.65

FA01-26-251 80/85 BRAKE DRUM 

only two available

132.65 MSRP

 

  Salvage - suspension,brakes & steering
Brake drums SA 

 RX7(79)

No hole

drums-1.jpg (599599 bytes)drums-2.jpg (603648 bytes) $45 each
       

USED - Salvaged - other >>>>         

Jack & handle RX-7 78/85 8531/8871-37-790 MVC-039F.JPG (22297 bytes)   4 $30  

General condition of parts: These were Arizona vehicles, there can be some surface rust, but nothing as intrusive as the North East Coast, and there may be some minor dings. A better description will be given upon request or ordering.  And trust me, the fast moving parts are gone.

***Prices subject to change without notice***

 

The other parts pages:

Cosmo RePu  RX3 808     SA/FB    FC3S   FD3S    Miata MX5

The Web Pages:

   Parts Catalog Home     Complete motors/parts   Cars for sale 

  Old School Performance - Odd & Ends  Wheels and tires  Miscellania - Books Posters and stuff   

Home

 

 


Items shown are limited to stock on hand. 

Other listed items or any available Mazda part may be ordered through email or phone

send requests to: sales@rotaryresponse.com most of the time

or call: 520 327 6404 -  Message any time

Human present - Tues. - Fri.  8:30 to 5:00 Arizona Time (no technical on this phone)

through PayPal 

Standard shipping charges to be applied,

US Post Rates   UPS Rates   FedEx Rates

Rx for your 7

Tucson, Arizona 85716

  "piston engine goes..."


rtrbutton1a.gif (914 bytes)                                     rtrbutton1a.gif (914 bytes)                                     rtrbutton1a.gif (914 bytes)

12 November 2010 11:25 -0500

Hit Counter                                                                                                                        -TOP-